REFLECTOR: Sump Tank Outlet

[Scott]

Joe,

my system was setup like that.  yeah it works but is cludgy.

I just redid all my fuel lines and put in a blukhead connector for the 
fuel feed and return line.  Looks good,  feels good, is good....

Scott

Joe Ewen wrote:
> My instruction manual calls for running the fuel line from the sump 
> tank to the engine via a port on the front of the sump then via a 
> bulkhead fitting through the firewall.  Does anyone see a reason that 
> I could not take the line from the rear of the sump tank and through a 
> clearance hole in the firewall?  This would result in a shorter, more 
> direct line and have 2 less connections.
>  
> Thanks,
> Joe
> ------------------------------------------------------------------------
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw > Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070704/c259c349/attachment.htm