REFLECTOR: Franklin Power Settings

[Michael Watson]

Are there any Franklin drivers out there using GRT's  EIS-6000 unit
and have converted the manual's data to inHg and have the following
Information handy. I hate to go through the exercise if it is out there.

In order to display percent power, you have to supply MAP and RPM
settings at sea level for 55% AND 75% power. The same info including
Delta/HP (change in Horsepower) is required for altitudes of 2000, 4000,
6000, 8000, 10000 and 12000 feet.

A couple of years ago before I purchased the EIS, I came up with
These rough calculations.

65% power at 4500 ft.                   65% power at 8500 ft.
Map 23hg 2400m RPM                  Map 22hg 2400 RPM
Map 22hg 2500m RPM                  Map 21g 2500 RPM
Map 21hg 2600m RPM                  Map 20g 2600 RPM

75% power at 4500 ft.                   75% power at 8500 ft.
Map 25hg 2400m RPM                  Map 24hg 2400 RPM
Map 24hg 2500m RPM                  Map 23hg 2500 RPM
Map 23hg 2600m RPM                  Map 22hg 2600 RPM

Any help would be appreciated. Thanks.


-- 
Mike W
1997 Velocity Elite RG
Franklin /IVO Electric CS
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070128/9ce239a1/attachment.html