REFLECTOR: stainless firewall

[John Tvedte]

Kurt,
 
Although I used Ti attached are pictures in SS - I would suggest you use T10x6 3/8" truss screws to screw the firewall material on.
 
Seal all edges.
 
John
 

________________________________

From: reflector-bounces at tvbf.org on behalf of NMFlyer1 at aol.com
Sent: Sun 2/18/2007 10:55 AM
To: reflector at tvbf.org
Subject: REFLECTOR: stainless firewall


For those of you that used a real sheet of stainless for the firewall;  How did you connect it to the firewall?  
I have a few ideas, but thought I'd ask. 
 
I am using the origonal nomex, but using a solid sheet of stainless over the top. 
 
Hope to get that attached in the next day or two. Then I can start re-installing the engine. Then I get to tripple check everything and get ready for engine start!!!!
 
About damn time... I know 
 
 Kurt  
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 232592 bytes
Desc: not available
Url : http://www.tvbf.org/mailman/private/reflector/attachments/20070218/d3a8f70a/attachment-0001.bin