REFLECTOR: aileron trim

[Scott Baker]

Hello Lou,
It may be weak springs, but more than likely the problem is the cord slipping on the capstan.  Wrap the cord around the capstan 2 to 3-turns.  It might also be helpful to add 'skicky stuff'  (like pine tar) to the cord to make it grip the capstan better.
Best regards,
Scott B
  ----- Original Message ----- 
  From: Lou Stedman 
  To: Reflector Velocity 
  Sent: Monday, December 31, 2007 3:44 PM
  Subject: REFLECTOR: aileron trim


  Hi Guys. Happy New Year to all.

  I have a question for the group regarding aileron trim. My Vel is about 18 yrs old. I am going through my first conditional inspection. I have replace some items that I didn't feel were in good condition. I have one area that puzzles me. That is the aileron, cord and spring, trim set up. It may be that my springs are old and have lost their strength but I am not sure. When I engage the electric motor, on the ground, it runs but nothing happens to the ailerons. I do not see any deflection up or down. I am not sure if this is normal or weather something needs replacing. Any help would be appreciated.

  Lou Stedman
  Velocity N7044Q
  Olean, NY


------------------------------------------------------------------------------


  _______________________________________________
  To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

  Visit the gallery!  www.tvbf.org/gallery
  user:pw = tvbf:jamaicangoose
  Check new archives: www.tvbf.org/pipermail
  Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20071231/12a701b9/attachment.htm