REFLECTOR: Of door seals and two bars
Terry Miles
terrence_miles at hotmail.com
Wed Dec 12 09:34:46 CST 2007
Hi Dave,
Sorry I didn't get back. I've been on the road for the last two days.
Thanks for the pic. I got it just fine. I am grateful. What you have done
seems seem to be the easiest for on/off too.
Regards,
Terry
_____
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of davedent at comcast.net
Sent: Sunday, December 09, 2007 5:09 PM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: Of door seals and two bars
Terry I have been using my electric tow for a good two years now on my
XL/RG and have had no problems. If you use this system I drilled my holes
on the fork one inch below the radius and drilled 3/8th holes to fit my tow
bar pins. I felt that this would have more strength there. Also I had to
use the extensions that came with the tow to clear then nose of the plane.
I don't have a picture of the tow hooked up but a picture of the holes in
the fork. I included the picture. Let me know if you can see the picture.
Dave
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20071212/981d19d4/attachment.htm
More information about the Reflector
mailing list