REFLECTOR: Of door seals and two bars
Terry Miles
terrence_miles at hotmail.com
Sun Dec 9 08:18:15 CST 2007
Thanks Dave. After I get out of SC and flying around some, Southern IL is
definitely on the itinerary.
Best regards,
Terry
-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of David Scharfenberg
Sent: Saturday, December 08, 2007 11:52 PM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: Of door seals and two bars
Hi Terry
Here are a couple of pics of my tow bar. The handle is made from some
different sizes of steel tubing that telescope, and two quick pins.
The end that clamps to the nose fork is made from some steel strap, 2
hinges, 2 short pieces of round tubing, a 5/16 bolt with the treads cut
off, and some stick-on felt. I just place the jaws around the nose
fork and slide the bolt through the 2 tubing pieces. I also have a
longer handle to replace the "T" handle. It hooks to my tug (golf
cart). It works really well.
Dave
More information about the Reflector
mailing list