REFLECTOR: Reflector Leveling A/C
Ron Brown
romott at roadrunner.com
Thu Dec 6 18:37:34 CST 2007
Hello Jim,
If memory serves me right, the bottom of the CS spar next to the fuselage and the tip of the nose are the level points. Use a clear plastic hose with water in it. You can use the bottom of the wing next to the fuselage and 1/4" below the nose with the wings on. Just make sure you are level side to side too.
Ronnie
----- Original Message -----
From: Jim & Sharon Beck
To: Velocity Aircraft Owners and Builders list
Sent: Thursday, December 06, 2007 5:00 PM
Subject: REFLECTOR: Reflector Leveling A/C
Can anyone help me with the best place to get a for & aft level on a finished aircraft. I want to do a new W/B and can get a side to side level off of my spar.
I did not build the aircraft so don't know where the level spots are. I have the level for the main wings and canard with the small jigs used to build it, but they do no have the same incidence. the firewall and the main spar seem to have enough glass and epoxy on them to make it difficult to find a spot that a level will sit on and give me an accurate reading.
Thanks for any help you can give me.
Jim
173RG N29RP
250 hrs
------------------------------------------------------------------------------
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20071206/df6c37a4/attachment.htm
More information about the Reflector
mailing list