REFLECTOR: FW: Wing root fairings
Alex
velocity_pilot at verizon.net
Tue Aug 14 16:51:50 CDT 2007
Doug-
The idea is good- but need to correct the geometry- I have placed a
diverging fillet in that area for just that reason- got the specs from the
AR-5 tapes on drag reduction- I am pretty sure that I have posted some
pictures on the velocity builders section- if not- you can drop by next week
at the hanger and take a look...
Alex
_____
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Douglas Holub
Sent: Monday, August 13, 2007 4:57 PM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: FW: Wing root fairings
I don't. I'm trying to eliminate all 90 degree intersections. Here's a
picture of my upper and lower wing-winglet intersections. I used pour foam
to build up the area, then shaped it with sandpaper glued to a 6" PVC pipe,
then covered it with two plies of bid.
Doug Holub
----- Original Message -----
From: Lawrence J. <mailto:ljepstein at hotmail.com> Epstein, MD
To: reflector at tvbf.org
Sent: Monday, August 13, 2007 2:16 PM
Subject: REFLECTOR: FW: Wing root fairings
Does anyone see any downside to fairing/filling the bottom wing-fuselage
joint in an effort to reduce drag?
Larry Epstein
_____
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070814/ff6fe0d4/attachment.htm
More information about the Reflector
mailing list