REFLECTOR: vortex generators
Alex Balic
velocity_pilot at verizon.net
Sun Aug 5 08:00:52 CDT 2007
You could use the tiny aluminum angle extrusions from Lowes/Home depot- and
attach with caulking/adhesive (do not use silicone caulk if your surfaces
are unpainted, it will be almost impossible to remove completely later from
the primer and prevent proper adhesion of your future top coat ) probably
some plastic angle out there, just not as readily available
-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of David Scharfenberg
Sent: Saturday, August 04, 2007 11:29 PM
To: 'Velocity Aircraft Owners and Builders list'
Subject: REFLECTOR: vortex generators
Does anyone remember what people were using to make inexpensive,
temporary vortex generators? It seems like they could be cut from a
readily available product, but I can't remember what it was.
Thanks,
Dave Scharfenberg
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
More information about the Reflector
mailing list