REFLECTOR: seal bulkheads before baffles?
Scott Baker
sbakr at comcast.net
Wed Aug 1 19:20:46 CDT 2007
Jorge,
Nice touch in positioning the fuel probe in the bulkhead facing the baggage area strake area (vs. the main cabin). This puts the "hockey puck" of the fuel probe out of the way and makes it much easier to upholster.
SB
----- Original Message -----
From: Jorge Bujanda
To: 'Velocity Aircraft Owners and Builders list'
Sent: Wednesday, August 01, 2007 7:56 PM
Subject: Re: REFLECTOR: seal bulkheads before baffles?
Doug,
See attached picture from Velocity website. No Jeffco yet.
Regards,
Jorge Bujanda
Velocity XL FG
Palmdale, CA
Website: http://members.dslextreme.com/users/jbujanda/
"Make your best case... not the best case."
"Spare the noise... convince through silence."
------------------------------------------------------------------------------
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of Douglas Holub
Sent: Wednesday, August 01, 2007 4:37 PM
To: reflector at tvbf.org
Subject: REFLECTOR: seal bulkheads before baffles?
I've just glassed in a baffle in each strake and the epoxy is starting to cure, so I would appreciate a quick answer if somebody knows this. My manual (and also the online manual) says:
"The bulkheads are installed first and properly sealed before the baffles are installed."
I glassed in the fuel bulkheads a couple of days ago. Am I supposed to coat the fuel tank with Jeffco before I glass in the baffles?
Doug Holub
------------------------------------------------------------------------------
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070801/329073d3/attachment.htm
More information about the Reflector
mailing list