REFLECTOR: [SPAM] Re: Matco to cleveland brakes

[Scott Baker]

MessageHello Barry,
I don't believe that the FG installation requires anything special.  Trial fit the Cleveland wheel and brake - and if there are no issues with fitting the wheel pants, you are good-to-go.  Even with the metal gear leg "booties", I would still install the phenolic shield.
SB
  ----- Original Message ----- 
  From: gibbons 
  To: 'Velocity Aircraft Owners and Builders list' 
  Sent: Friday, April 27, 2007 4:31 PM
  Subject: [SPAM] Re: REFLECTOR: Matco to cleveland brakes


  Scott Baker
  On the instruction for putting the clevland brakes on in place of mattco, be the same if you have the gear leg sockets on.
  Barry
    -----Original Message-----
    From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of Tom Martino
    Sent: Saturday, April 14, 2007 10:29 AM
    To: Velocity List
    Subject: Re: REFLECTOR: Matco to cleveland brakes


    By the way ... There was a noticeable difference after I upgraded to Cleveland (so long as all the gear is on the ground!)

    Seriously, the braking is fast, assured and never a heat issue.

    Tom


    On 4/14/07 5:05 AM, "Scott Baker" <sbakr at comcast.net> wrote:


      The Cleveland upgrade includes new wheels, brakes and dust cap.  You will hold on to the original Matco axles, tubes, tires, axle nut.
      The Velocity<>Cleveland conversion comes with custom made spacers, washers, and longer bolts to secure the axles to the gear legs.
      SB


        ----- Original Message ----- 
         
        From:  gibbons <mailto:gibbons at as.net>  
         
        To: 'Velocity Aircraft Owners and Builders  list' <mailto:reflector at tvbf.org>  
         
        Sent: Friday, April 13, 2007 11:37  PM
         
        Subject: REFLECTOR: Matco to cleveland  brakes
         

         
        I'm  thinking about going to cleveland brakes , I have Matco   brakes  Will the wheels from Matco fix the cleveland brakes? Will  the Cleveland brakes bolt  on to the same axle?

        What  would the part number be for the brakes for the XL? I want to buy them from  Aircraft Spruce because they are closer than Velocity.

        Barry


         

------------------------------------------------------------------------


        _______________________________________________
        To change your email  address, visit http://www.tvbf.org/mailman/listinfo/reflector

        Visit the  gallery!  www.tvbf.org/gallery
        user:pw         Check  new archives: www.tvbf.org/pipermail
        Check old archives:  http://www.tvbf.org/archives/velocity/maillist.html



--------------------------------------------------------------------------
      _______________________________________________
      To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

      Visit the gallery!  www.tvbf.org/gallery
      user:pw       Check new archives: www.tvbf.org/pipermail
      Check old archives: http://www.tvbf.org/archives/velocity/maillist.html





------------------------------------------------------------------------------


  _______________________________________________
  To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

  Visit the gallery!  www.tvbf.org/gallery
  user:pw   Check new archives: www.tvbf.org/pipermail
  Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070427/0c0e6c74/attachment.html