REFLECTOR: Thermocouple Wire
John Tvedte
johnt at comp-sol.com
Sun Apr 22 17:16:24 CDT 2007
Scott,
What kind of insulation does this wire have? Teflon, PVC...? Price?
John
________________________________
From: reflector-bounces at tvbf.org on behalf of Scott Derrick
Sent: Sun 4/22/2007 4:17 PM
To: Velocity Aircraft Owners and Builders list
Subject: REFLECTOR: Thermocouple Wire
After talking to Dynon about what to use I bought 4 pair, shielded 24
awg stranded cable. With my TIT prope that will give me 3 extra
pairs. Omega was the only online source I could find. Newark only has
single pair unshielded cable.
http://www.omega.com/ppt/pptsc.asp?ref=4KX_MULTIPAIR_CABLE&nav=temh10
The multipair cable is lighter and quite a bit smaller(diameter) than
running single pair cables even with the extra pair. With 4 pair cable
I will be running 2 cables to each side of the engine, one type K and
one type J, instead of running 6 single pair cables to each side.
Dynon said that with the long run for a pusher combined with the glass
airframe I should use shielded.
Scott
--
-
What county can preserve its liberties, if its rulers are not warned from time to time that its people preserve the spirit of resistance.
Thomas Jefferson
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 4681 bytes
Desc: not available
Url : http://www.tvbf.org/mailman/private/reflector/attachments/20070422/e445b7aa/attachment.bin
More information about the Reflector
mailing list