REFLECTOR: oil temp problems solved
gibbons
gibbons at as.net
Mon Apr 16 18:40:34 CDT 2007
Where do get a copy of the SI 1316A.
Barry
-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of John Dibble
Sent: Sunday, April 15, 2007 6:06 PM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: oil temp problems solved
Mack,
Where is your oil temp measured?
John
MMurp16900 at aol.com wrote:
Hello Jacksubject oil temp.I am so happy you solved your oil cooler by-
pass valve seat problems.That is addressed in LYC .service instruction
1316 A,As you know it must be tightly closed and seated to cause all the
oil to go thru the coolers.I did something that would not recommend to
any one.it is only an experiment.I increased the length of the 3/16 rod
approximately 1/4 inch so the valve is tightly closed and I had to tape
off the rear cooler so we can get cabin heat. oil temp. 180 f while long
climb RegardsMackXl IO540 300 hp.
_____
See what's free at AOL.com
<http://www.aol.com?ncid=AOLAOF00020000000503> .
_____
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070416/b0689f2d/attachment-0001.html
More information about the Reflector
mailing list