REFLECTOR: oil temp problems solved
John Dibble
aminetech at bluefrog.com
Sun Apr 15 20:05:36 CDT 2007
Mack,
Where is your oil temp measured?
John
MMurp16900 at aol.com wrote:
> Hello Jacksubject oil temp.I am so happy you solved your oil cooler
> by- pass valve seat problems.That is addressed in LYC .service
> instruction 1316 A,As you know it must be tightly closed and seated to
> cause all the oil to go thru the coolers.I did something that would
> not recommend to any one.it is only an experiment.I increased the
> length of the 3/16 rod approximately 1/4 inch so the valve is tightly
> closed and I had to tape off the rear cooler so we can get cabin heat.
> oil temp. 180 f while long climb RegardsMackXl IO540 300 hp.
>
>
> -----------------------------------------------------------------------
> See what's free at AOL.com.
>
> ----------------------------------------------------------------
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives:
> http://www.tvbf.org/archives/velocity/maillist.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070415/1ba3e257/attachment.html
More information about the Reflector
mailing list