REFLECTOR: oil temp problems solved

[MMurp16900 at aol.com]

Hello Jack
subject oil temp.
I am so happy you solved your oil cooler by- pass valve seat  problems.
That is addressed in LYC .service instruction 1316 A,
As you know it must be tightly closed and seated to cause all the oil to go  
thru the coolers.
I did something that would not recommend to any one.it is only an  experiment.
I increased the length of the 3/16 rod approximately 1/4 inch so the valve  
is tightly closed and I had to tape off the rear cooler so we can get cabin  
heat. oil temp. 180 f while long climb
 
Regards 
Mack
Xl IO540 300 hp
. 



************************************** See what's free at http://www.aol.com.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070415/938209a2/attachment.html