REFLECTOR: RG Questions
Laurence Coen
lwcoen at hotmail.com
Thu Apr 12 12:51:26 CDT 2007
Mack,
I compared my old manual with the current one on the builders site. I have 1" Dia. aluminum bushings with oilite inserts but the current manual shows 1 1/4" Dia. bushings with a steel insert. Everything else looks the same.
Larry Coen
N136LC
----- Original Message -----
From: MMurp16900 at aol.com
To: reflector at tvbf.org
Sent: Wednesday, April 11, 2007 11:40 AM
Subject: Re: REFLECTOR: RG Questions
Hi Larry
I agree that steel on steel is not a good idea but that is the way that most Velocitys are set up.
The bolt does not turn.It has been that way since 1999.
Today I spoke to Scott Baker at Velocity He said that they were considering adding a grease fitting.
All the best
Mack
------------------------------------------------------------------------------
See what's free at AOL.com.
------------------------------------------------------------------------------
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070412/15e299be/attachment.html
More information about the Reflector
mailing list