REFLECTOR: fuel probe types and mounting locations

[Scott Baker]

Andy,
Velocity has Skysport 12v (in) 0-5volts (out), 12" long with 9" (or is it 10") bendable.  Cost The factory uses this voltage type probe with BMA units.  Probes are in stock.
Scott B.
  ----- Original Message ----- 
  From: Andrew Ellzey 
  To: Velocity Aircraft Owners and Builders list 
  Sent: Wednesday, April 04, 2007 11:22 AM
  Subject: REFLECTOR: fuel probe types and mounting locations


  Its time for me to choose a fuel probe type. I am installing a EFIS one system and the manual says that If I use a westach 0-5 VDC probe I don't need to buy an adapter to make it work. By looking at the Westach probe information I will need to buy a bendable type probe probably part number 395-5SB-5 (6" to 12" depth). Has anyone on the reflector installed this probe and can you send pictures as to the location that you chose to mount and penetrate the fuselage? If you pictures are to large to post please send direct to ajlz72756 at yahoo.com 

  Andy Ellzey


------------------------------------------------------------------------------


  _______________________________________________
  To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

  Visit the gallery!  www.tvbf.org/gallery
  user:pw   Check new archives: www.tvbf.org/pipermail
  Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070404/9728d69d/attachment.html