REFLECTOR: elevator trim spring
Alex
alex157 at pwhome.com
Mon Apr 2 17:44:19 CDT 2007
Doug-
I would upgrade that one- best to have the actuator on top of the canard-
fro ease of maintenance plus replacement springs available from the factory
and all......
_____
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Douglas Holub
Sent: Monday, April 02, 2007 5:34 PM
To: reflector at tvbf.org
Subject: REFLECTOR: elevator trim spring
I've got one of the old elevator trim springs. It's just a straight piece of
9" x 2" fiberglass. (It's not shaped like a question mark.) My plans mount
the linear actuator on the aft side of the canard bulkhead, where the keel
is on Elite kits. Did the factory switch to the question mark shape so that
it would work with the linear actuator mounted in the doghouse, or is it an
improvement no matter where the linear actuator is mounted?
Doug Holub
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070402/062d9905/attachment.html
More information about the Reflector
mailing list