REFLECTOR: elevator trim spring

[Douglas Holub]

I've got one of the old elevator trim springs. It's just a straight piece of 9" x 2" fiberglass. (It's not shaped like a question mark.)  My plans mount the linear actuator on the aft side of the canard bulkhead, where the keel is on Elite kits. Did the factory switch to the question mark shape so that it would work with the linear actuator mounted in the doghouse, or is it an improvement no matter where the linear actuator is mounted?

Doug Holub
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070402/1a251478/attachment.html