REFLECTOR: thicker stainless cutting

[Alex Balic]

Just one thing to add about drilling the stainless- if possible, first
pierce it with a punch, then you will be able to drill it fairly easily. The
laser sounds like a good idea, if you already have a template for the
firewall..

 

  _____  

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of PUSHERPILOT at wmconnect.com
Sent: Monday, September 04, 2006 11:22 PM
To: reflector at tvbf.org
Subject: Re: REFLECTOR: thicker stainless cutting

 

I also had a difficult time cutting and drilling my thicker SS firewall.
Just after I finished I had an air conditioner repairman come to the house.
When he saw my firewall he said that I should have taken it to their shop
and they would have used their laser to cut it.  Since I was done I didn't
follow up, might be worth a look if you haven't started yet. 

Mel Bina

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20060905/16a9c8aa/attachment-0001.html