REFLECTOR: BMA Autopilot

[Dave Bertram]

I have not had any problem with my BM autopilot.  I did take a few tries
before I had the sensitivity set right.  I am down around 50 now.  Dave
Bertram
350TX 
 
-------Original Message-------
 
From: Velocity Aircraft Owners and Builders list
Date: 11/18/06 13:23:56
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: BMA Autopilot
 
Craig, if you contact me on doug at customstudio.com I can relate my experience
with the BM auto pilot so far.
 
Doug Kanczuzewski
 
________________________________
 
From: reflector-bounces at tvbf.org on behalf of Craig and Denise Woolston
Sent: Fri 11/10/2006 7:57 PM
To: 'Velocity Aircraft Owners and Builders list'
Subject: REFLECTOR: BMA Autopilot
 
 
 
Anyone out there with Blue Mountain Avionics Autopilot experience?  I tried
engaging for the first time today and the servos came to life as soon as I
applied power to the controller, which is in direct conflict with the book. 
It says it shouldn't do anything until you "engage" it.  When I do try 
engaging" it, the servos just jump around, and the display flashes 
DISENGAGE".  I have a EFIS LIte with 2.23 software.  This was all on the
ground, although it does the same thing in flight also.  Any suggestions?
 
 
 
Craig
 
XL-5FG Flying in Palmdale, CA
 
 
 
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20061120/be4d4cc5/attachment.htm