REFLECTOR: planform

[Ron Brown]

Here's an autocad drawing for my 173 std fuselage.  Stretch the fuselage by 
10" behind the canard and you should be close to an XL.  (same wings and 
canard, fuselage is 10" longer).

Hope this helps.




----- Original Message ----- 
From: "Steve Goldman" <steve at fatcatair.com>
To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
Sent: Sunday, April 30, 2006 9:39 PM
Subject: REFLECTOR: planform


>
> I'm doing some mods in my hangar and the thought came to me
> just now that although the water tank that I'm putting in
> doesn't interfere with my tiger it might be a problem with
> the velocity. As far as I can see the Velocity web site has
> dimensions but not a dimensioned planform and I don't see it
> in the construction manual. Does anyone have one or know where
> to find one?
>
> -- 
> Steve Goldman
> '77 Tiger N28531
> XL-5 kit on order
> Pittsboro, NC (9NC8)
> _______________________________________________
> To change your email address, visit 
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Top View.dwg
Type: application/octet-stream
Size: 70119 bytes
Desc: not available
Url : http://www.tvbf.org/mailman/private/reflector/attachments/20060501/ae8ce3bf/TopView-0001.obj