REFLECTOR: Aluminum Tubing for Brakes

[John Dibble]

Ronnie,
I notice that your tires wear on the inside.  Mine do also.  I figured it was because
mine don't have that much camber, but yours look like they have a lot of camber, or
was it up on jacks when the picture was taken? I have remounted my tires in reverse to
even out the wear.

John

Ron Brown wrote:

> Here's a picture.  The nylon conduit stops about 8" short of the caliper.
> Then aluminum tubing runs down to the caliper to minimize heat transfer to
> the nyloflow from hot brakes.
>
> Ronnie