REFLECTOR: Fuel Sight Gauges

[Gary Stull]

I used the stock sight tubes, but covered the tubes with a fluorescent drop 
light tube cut in half. On the top and bottom I installed plumbing style PVC 
caps cut the same way. Protects the sight glasses and I also labeled the 
outside of the flo tubes with the fuel levels in 5 gal increments. I can 
take digital photos if you're really interested
----- Original Message ----- 
From: "Jorge Bujanda" <jbujanda at dslextreme.com>
To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
Sent: Saturday, July 22, 2006 12:46 PM
Subject: REFLECTOR: Fuel Sight Gauges


>  I am not that comfortable with the fuel sight gauges that come with
> the kit.  Has anyone experimented with, or know of, a "better sounding"
> setup.  ASS catalog offers clear PVC tubing and states that is used in
> Quickies (attached).  Is anyone familiar with this setup, fittings to
> use, or share a different approach?
> Thanks
> Regards,
>
> Jorge Bujanda
> Palmdale, CA
> XL FG
> http://members.dslextreme.com/users/jbujanda/
>
>
>


--------------------------------------------------------------------------------


> _______________________________________________
> To change your email address, visit 
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html