REFLECTOR: Brake Fitting

[Jim Agnew]

They are METRIC threads!!
 
Jim
 
James F. Agnew
Jim_Agnew_2 at Yahoo.Com
Tampa, FL
Velocity 173 Elite Aircraft Completed & Flying 



----- Original Message ----
From: Craig and/or Denise Woolston <cdwoolston at verizon.net>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Sent: Monday, July 17, 2006 9:06:56 AM
Subject: REFLECTOR: Brake Fitting


I know this has long since been a debate, but what is the general consensus of the thread type in the brake master cylinders we get from Velocity?  And what have people generally used to seal the threads if anything at all?
 
Now for confession… I thought I had mine measured and procured from a local hydraulics shop, have installed it with both liquid Teflon and now with Aviation Form-A-Gasket and I still can’t get it sealed.  At this point any suggestions are welcomed.
 
Thanks,
 
Craig
XL-5FG, Palmdale , CA
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20060717/c7a47062/attachment-0001.html