REFLECTOR: Fastbuild Wing Delaminations

[Pat Shea]

Make sure you use plenty of weight. If you end up w/ a
slight depression it will be easy to fill. If you
leave yourself a solid bulge, you'll have to fair it
in w/ micro since you don't want to sand away the
triax.

Pat

--- Hiroo Umeno <humeno at microsoft.com> wrote:

> We were applying and sanding the "Smooth UV Primer"
> and discovered that
> our fast build wing we got in 1999 has developed
> series of delamination
> bubbles.  Most are about 1 inch in diameter but one
> is about 6 inch.
> Most are located on top of the wing the near the
> leading-edge.
> 
>  
> 
> I have read here that the standard repair procedure
> is to drill a hole
> on top of the bubble and inject them with epoxy,
> then sand smooth.  Is
> that still the commonly accepted practice?
> 
>  
> 
> Hiroo


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com