REFLECTOR: Auto Marine or Airplane paints

[Wayne]

If that is the stuff they used on mine it was a bitch to cover with primer 
and finish paint. It kept bleeding through  a yellowish cast.
Wayne
>> At Hangar 18 we started w/ a "primer-surfacer" and did the sand out and
>> patch fill routine, until one day we said "enuf is enuf."  (Actually I
>> got to that point way before M. Collier did.)  Then we sprayed on a
>> final "primer-sealer" coat.  All this was done just in the shop w/ good
>> ventilation, but no spray booth.  These are two different products and
>> both are referred to by Akzo-Nobel as "under coatings."
>> http://www.akzonobelcarrefinishes.net/default.asp?sid=65395&pid=420
>> This was good stuff.  Not too costly.  Hangar 18 has painted about 5
>> airplanes with it and had good success.  Here are the details.