REFLECTOR: ELT

Keith Hallsten KeithHallsten at quiknet.com
Mon Jan 23 21:38:39 CST 2006


Unfortunately not.  The panel annunciator/switch assembly is a requirement
for new ELT installations.

 

 

  _____  

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Terry Miles
Sent: Monday, January 23, 2006 6:00 PM
To: 'Velocity Aircraft Owners and Builders list'
Subject: RE: REFLECTOR: ELT

 

Al,

I believe the panel portion is just an activation warning light and reset
switch to stop the transmission if it goes off when it shouldn't.  To the
best of my knowledge there is no "requirement" to have this device in your
panel.  I am not mounting mine in the front panel.

Terry

-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Al Gietzen
Sent: Monday, January 23, 2006 6:42 PM
To: reflector
Subject: REFLECTOR: ELT

During construction of my plane I never gave much thought to the ELT
installation; thinking that I would eventually mount it somewhere behind the
vanity bulkhead. No wires to pull - no big deal.

 

I bought an Ameri-King AK450 a few months ago, and put it aside.  I opened
it today to do the installation.    It has a Remote Unit that should be
mounted in the panel, and a cable that goes to the transmitter unit.  Oops;
I should have dealt with this long ago before my panel was nicely painted
and completed, and the wire bundles were covered by the nice upholstery
panels.  And it needs to be installed in a specific orientation on major
structure. Hum-m-m; those places are pretty well used up. 

 

One big concern - the instructions say that the antenna (if mounted in a
non-metallic airplane) needs a ground plane that is a minimum of 36" in
diameter!  How can that be achieved?

 

I'm sure once I get over "Installation Shock" I can deal with this, but
suggestions will be appreciated.

 

I understand this can be put off until after completion of the 40 hour test
program, but it probably won't be any easier then.

 

Thanks,

 

Al

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20060123/176808d1/attachment.html


More information about the Reflector mailing list