REFLECTOR: [SPAM] Elite Seat Bracket and Speed Brake
Scott Baker
sbakr at comcast.net
Sun Dec 17 13:54:27 CST 2006
Kevin,
The installation calls for a small metal plate that gives support the the
rear-inboard seat rail attach points for both the pilot and copilot seats.
It measures about 3/16" thick x 3 x roughly 9" long. The plate sits on the
floor is situated left-to-right. The middle portion of the plate resides
inside the keel. The plate is secured to the keep with an "L" shape
bracket. If you don't have a plate of this approximate dimension, we will
send one.
Best regards,
Scott B.
----- Original Message -----
From: "Kevin Baker" <flykb at verizon.net>
To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
Sent: Sunday, December 17, 2006 11:42 AM
Subject: [SPAM] REFLECTOR: Elite Seat Bracket and Speed Brake
> Hi All,
> I have the speed brake in (Elite Std RG) and was wondering if anyone
> had any wisdom (potential problems) with putting in the Elite Front
> seat rails. I thought there was something about the seat rail hard
> point being in the area of where the speed brake is.??
>
> Merry Christmas,
> Thanks,
> Kevin Baker
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
More information about the Reflector
mailing list