REFLECTOR: MT CS Prop

[Velocity_AZ]

I am not having any problems w/ my MT prop.  I did have a bit of grease leak
prior to the new design - none now. 280 hours on a 173FG w/IO-360-C1E6 with
high compression.

Kevin 

-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Chuck Harbert
Sent: Wednesday, August 23, 2006 2:12 PM
To: reflector at tvbf.org
Subject: REFLECTOR: MT CS Prop

Can anyone give me their good or bad experiences with the latest MT CS prop
with the new pusher designed blades?

I talked with Scott Baker today and he said that the MT CS prop is what the
factory is recommended and their not having the problems with blades since
MT redesigned them, and the seal problems are cured.

I have a IO-360-A1A in a Std RG that will be turbo normalized by next year. 
At slightly under $10K for the MT CS prop, it sounds liker the way to go.

Thanks for your help.

Chuck H 


_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery user:pw = tvbf:jamaicangoose Check
new archives: www.tvbf.org/pipermail Check old archives:
http://www.tvbf.org/archives/velocity/maillist.html