REFLECTOR: Going shopping at AS&S - dumb question on epoxy

[Andy Millin]

Sorry, it was "Quick Carl" that did everything fast.  Marathon John slowed
him down. 

-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Pat Shea
Sent: Monday, August 07, 2006 3:40 PM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: Going shopping at AS&S - dumb question on epoxy

I've actually found the pot life of EZ-83 and EZ-84 to be about the same.
However, at around 75* EZ-83 takes about 24 hours to fully cure where EZ-84
takes like 72
- call me impatient, but 24 hours is extreme enough!

Personally, I want to come back the next day and have the prior day's layups
be fully cured - I almost always use heat lamps just to make sure. 

FWIW, Pat


--- Andy Millin <amillin at sbcglobal.net> wrote:

> Hi Tony,
> 
> I believe your answers are Yes and Yes.  Make sure you get the EZ-84 
> hardener.  The other hardeners have less pot life.


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html