REFLECTOR: NOSE STRUT

[Ron Brown]

I'll be darned.  I went to yellowpages.com and searched for "grinding" - I 
found three shops in Charlotte, NC.  Mine shudder too - I am going to give 
them a try at my local "grinder"!!!

Thanks Pat!!!
Ronnie

----- Original Message ----- 
From: "Pat Shea" <xl340hp at yahoo.com>
To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
Sent: Tuesday, September 06, 2005 7:30 PM
Subject: Re: REFLECTOR: NOSE STRUT


> Ronnie,
>
> I first went to an auto shop to see if they could turn
> the disks - no luck as they don't fit in their jigs.
> My next stop was a machine shop who in turn said I
> needed to take them to a grinding shop. I'm glad they
> had a reference because I've never even heard of a
> grinding shop... Anyway, $20 buck later I was out the
> door of "Jack Dreez Grinding" with two flat disks and
> no more shudder problems. I live in a big city (Los
> Angeles) where things tend to be specialized - maybe
> your local machine shop also does grinding. If not,
> they're sure to have a reference.
>
> Pat
>
> --- Ron Brown <romott at adelphia.net> wrote:
>
>> Pat,
>>
>> Could you define "grinding shop" for me.  Is this a
>> machine shop or someone
>> who resurfaces disk brakes for cars?
>>
>> THANKS
>> Ronnie
>
>>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
> _______________________________________________
> To change your email address, visit 
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html