REFLECTOR: Plenum attachment
Chuck Harbert
c.harbert at comcast.net
Sun Sep 4 13:47:56 CDT 2005
>
ScottDerrick wrote:
Also how are people attaching the firewall, runner to plenum assembly.
> The manual has a direct connection which has no slip joint to
> accommodate the engine moving around.
> Also regarding the runners to the firewall, the manual has us using
> the cowl screws to hold the runner to the firewall. I'm still toying
> with the idea of a groove for the cowl to slip into and doing away
> with all those screws. Any other suggestions?
>
> I searched my email archives and came up with nada on "plenum" in the
> subject line.
>
> Pictures are of course are greatly appreciated.
>----------------------
Scott, I think I sent some pictures a couple months ago on how I mated the
plenums using a section of rubber inner tube that I stretched over each end
and were attached with a piece of aluminum pop riveted to each side of the
plenum. I attached the firewall plenum pieces to the firewall with machine
screws and capture nuts (cabin side of firewall). I left about an inch
between the 2 plenum pieces for flexing. It seems to be working well and is
easily removed (4 machine screws). People have said it looks good too.
Chuck H
More information about the Reflector
mailing list