REFLECTOR: Automotive / aviation ignition harness

[Ron Brown]

Wasn't your old engine a Lycoming 360?  If so, what was the part number for 
the auto plugs you were using?

Ronnie

----- Original Message ----- 
From: "Scott Derrick" <scott at tnstaafl.net>
To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
Sent: Tuesday, October 25, 2005 10:28 PM
Subject: Re: REFLECTOR: Automotive / aviation ignition harness


>I was running auto plugs with my EI and standard aircraft plugs with the 
>mag.  I would run the auto plugs for 200 hours and then replace them.
>
> Scott
>
> Brian Michalk wrote:
>
>> Jim Sower wrote:
>>
>>> I've always used the spiral wound high performance automotive plug wires 
>>> (connected to automotive plugs) and had no ignition noise at all.  The 
>>> spiral winding seems to choke the noise.  From all I've heard, they last 
>>> a lot longer than aircraft wires too.
>>> Been good to me ... Jim S.
>>>
>>
>> I ordered a set of Magnecor wires.
>>
>> Is there anyone here running auto plugs in a Franklin?
>> If not on a Franklin, what are other people running?
>> _______________________________________________
>> To change your email address, visit 
>> http://www.tvbf.org/mailman/listinfo/reflector
>>
>> Visit the gallery!  www.tvbf.org/gallery
>> user:pw = tvbf:jamaicangoose
>> Check new archives: www.tvbf.org/pipermail
>> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>>
>>
>>
> _______________________________________________
> To change your email address, visit 
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html