REFLECTOR: cooling requirements

[michalk]

Yes, stepper is in place, jut not connected to any wires until I get the 
time to do so.  I want to fly!!!  I have deferred MANY of the cool items 
that I originally wanted, but before I knew it feature creep and over 10 
years of building are forcing me towards reality.

I've got pictures ... I think.  My intake scoops are at TVBF.org ... 
lemme see.
http://www.tvbf.org/gallery/?dir=builder_options%2Fadjustable_intake_scoop

There's also a drawing in there.

Al Gietzen wrote:
> I have a linear stepper motor which drives a rod that opens and closes 
> the opening to the scoop.  My napkins say that the scoops should be 
> about 1 by 6 inches in cruise.  Of course I have no idea where the 
> boundary layer is.
> 
> Brian;
> 
> Do you already have the drive mechanism in place?  What stepping motor are
> you using?
> Are any pics posted?
> 
> Thanks,
> 
> Al (Repairing more dis-bonding on the Wingco wings)
> 
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html