REFLECTOR: Wing Root Oil Cooler
Keith Hallsten
KeithHallsten at quiknet.com
Fri Oct 21 22:50:20 CDT 2005
Larry,
Installing an oil cooler in the wing is not a "standard" Velocity feature,
so it depends on how your plane's builder decided to do it. I would tend to
suspect that you could get it out without removing either the engine or the
wing, but you will have to get the cowl off and figure out how it was
mounted.
Keith
-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Larry Parham
Sent: Friday, October 21, 2005 7:35 PM
To: reflector at tvbf.org
Subject: REFLECTOR: Wing Root Oil Cooler
I am having a oil leak in my wing root oil cooler. It tends to leak more
hotter it is. Can you remove the oil cooler without removing the wing?
(NON BUILDER)
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
More information about the Reflector
mailing list