REFLECTOR: Shimmy and Nose Gear Pivot Bushings
robertbuls at aol.com
robertbuls at aol.com
Sat Nov 19 13:04:30 CST 2005
Just curious, and haven't seen reference to it....are these shimmy/gearleg vibrations limited to "scratch-built" kits, or are the fast-build kits similarly afflicted? (Hoping that fix that Duane was mentioned considering gets included in my fast-build kit due in Jan).
Bob
-----Original Message-----
From: Brian Michalk <michalk at awpi.com>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Sent: Sat, 19 Nov 2005 10:24:00 -0800
Subject: Re: REFLECTOR: Shimmy and Nose Gear Pivot Bushings
Alex Balic wrote:
> There is a viscous coupling that I had to spec years back for a machine
> design project- kind of like a tiny torque converter filled with oil- I
> have no idea if there is one available that could/would fit the nose
> gear, but basically, it allows relatively slow turning of the shaft, but
> resists rapid turning/oscillation ( shimmy) kind of the same function
> that a shock absorber has on the suspension of your car- will see what I
> can locate on it and report back........
> > Alex
>
How about a magnetic particle clutch?
http://www.sdp-si.com/D790/HTML2/D790C13026_2.html
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20051119/d255cefa/attachment.htm
More information about the Reflector
mailing list