REFLECTOR: Shimmy and Nose Gear Pivot Bushings
John Dibble
aminetech at bluefrog.com
Tue Nov 15 19:17:51 CST 2005
How did you change the caster angle?
John
Wayne wrote:
> I molded a large bowl of lead into the front of my nosewheel pant/.It
> changed the shimmy from high frequency to a very low frequency.
> Revising the caster angle on my nose gear finally fixed the shimmy tendency.
> It shimmied more often when the front was heavily loaded. I changed the
> caster angle so with two large folks up front the caster was near zero and
> slightly negative when lightly loaded.
> At the same time I installed a nose wheel lock but have never needed it.
> Wayne
> -
More information about the Reflector
mailing list