REFLECTOR: Winglet Fillets

[Alex Balic]

Got a couple of pictures uploaded under: builder options/winglet fillets
pictures taken before final finish, used blue foam to make the fillets,
then 2 plies bid over and micro- hard to see exactly because of the
curve of the shape, but the fillet starts at the front at about 1.5"
radius, starts to expand just aft of max chord to about 8" radius at the
trailing edge, which was extended to accommodate 



-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Ron Brown
Sent: Thursday, November 10, 2005 7:10 AM
To: Velocity Aircraft Owners and Builders list
Subject: REFLECTOR: Re Uploading to the Reflector

Alex, try this:

1.   Go to http://www.tvbf.org/gallery/

2.  Click on "LOGIN" at the upper right of the screen.

3.  Enter user name "tvbf" (without the quotes)

4.  The password is "jamaicangoose"

5.  Then on the left side, choose the folder or subject that you want to
upload the pictures to and click on it.

6.  Click on "upload" in the upper right side of the page.

7.  Then you will get a new page that says "FILE TO UPLOAD", click on
"browse" which will allow you to choose the folder location on your C:
drive
of the pictures you want to upload.

8.  Click on the file you want to upload, then click on UPLOAD.

Good luck!!!  I hope this helps.
Ronnie


_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html