REFLECTOR: Help-elevators
gattenby at GBRonline.com
gattenby at GBRonline.com
Sun May 22 09:34:29 CDT 2005
Larry,
Do some math...
I'm building a suv (same body as an se) with the 173 wings.
The Canard is 178 inches long and the fusalage at the canard
bulkhead is 33 inches wide.
178-33 is 145 inches
145 / 2 is 72.5 inches.
Build them to the 73 that you have and you will still have
to trim them down.
Noel
----- Original Message Follows -----
From: "lawrence epstein" <ljepstein at hotmail.com>
To: reflector at tvbf.org
Subject: REFLECTOR: Help-elevators
Date: Sat, 21 May 2005 22:06:16 +0000
> Help!
> starting to fabricate my elevators (I knew I should have
> paid Alan Shaw for the control surfaces!)
>
> Elite 173
>
> I mated the 2 foam peices and they add up to only 73
> inches. the manual says the elevators should be 75
> inches each.
>
> Odes this get trimmed later?
>
> Should i bond them to the torque tube @ 75 inches & fill
> the middle (with foam?)
>
> Any ideas??
>
> Larry Epstein
>
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives:
> http://www.tvbf.org/archives/velocity/maillist.html
More information about the Reflector
mailing list