REFLECTOR: Squat switch
Ron Brown
romott at adelphia.net
Sat May 21 09:53:23 CDT 2005
Yes, I got the switch from Velocity.
I wired it into the up circuit in series with the up high pressure cut off
switch. And best I can recall, it is a SPST with a normally open contact
closing at about 80 knots - 4" water. I don't know about the current
rating.
I found it works best if installed in the cabin or has the low pressure side
tubed to cabin or static pressure. There is a fair amount of "pitot"
pressure in the nose compartment with the gear doors open.
Ronnie
More information about the Reflector
mailing list