REFLECTOR: Rudder trim

[Alex Balic]

I like that Larry- will have to make me a pair of those as well- might
bond a small SS patch to the face of that other piece of channel just
for kicks..
 
-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Laurencw W. Coen
Sent: Tuesday, May 10, 2005 11:13 AM
To: reflector at tvbf.org
Subject: REFLECTOR: Rudder trim
 
After reading about how people with flying airplanes were having to trim
their rudders to center the ball, I thought there might be a better way.
I think that this is a better way than shimming.  I built a screw
adjustable rudder stop that doesn't take much longer to build than
shimming.  The advantages are infinate adjustment and easy fix if you
didn't get it right the first time. I've attached pictures because
that's easier than typing. The aluminum "U" channel is 1/2" and the
screw is a 10-32x3/4" stainless.
 
Larry Coen
N136LC SE/RG Franklin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20050510/38fec315/attachment.htm