REFLECTOR: Roof NACA's

[michalk]

This is a spreadsheet developed by a Reflectorite:
http://www.tvbf.org/docs/nacascoop1.1.xls

I don't remember who wrote it.  Someone pipe up for this credit.

It will plot the layout of your NACA so that you can cut it out 
yourself.  Easy to make.

KeithHallsten wrote:
> Scott,
> 
> My kit came with the armpit scoops, but I made the top NACA scoops using
> dimensions provided by Velocity.  I don't have my notes on that at home, and
> won't be back to the hangar until Tuesday at the earliest, but the factory
> guys should be able to give you the fuselage-centerline-to-scoop-centerline
> measurement.  You will probably need to get the molded ducts (runners) from
> the factory, anyway.
> 
> Keith Hallsten
> 
> 
> ----- Original Message ----- 
> From: "Scott Derrick" <scott at tnstaafl.net>
> To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
> Sent: Sunday, May 01, 2005 7:42 PM
> Subject: REFLECTOR: Roof NACA's
> 
> 
> 
>>Sorry folks I forgot to change the Subject line.
>>
>>Roof NACA's.
>>
>>I need to cut the holes in the roof to install the NACA's. My plane was
>>a updraft, and the instructions say to cut out the pre-marked holes
>>which I don't have.
>>
>>Anybody know the spacing side to side, or center to center I should use?
>>
>>Scott
>>
>>_______________________________________________
>>To change your email address, visit
> 
> http://www.tvbf.org/mailman/listinfo/reflector
> 
>>Visit the gallery!  www.tvbf.org/gallery
>>user:pw = tvbf:jamaicangoose
>>Check new archives: www.tvbf.org/pipermail
>>Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>>
> 
> 
> 
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html