REFLECTOR: RE: NOSE WHEEL GOT SIDEWAYS [heur]

[Tom Martino]

I have ordered the new parts on will do many retraction tests and
adjustments before venturing out into the wild blue!

-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Al Gietzen
Sent: Thursday, March 10, 2005 8:09 AM
To: 'Velocity Aircraft Owners and Builders list'
Subject: RE: REFLECTOR: RE: NOSE WHEEL GOT SIDEWAYS [heur]

BINGO ... Mike Deeter wins.

I had no spacer pm the nose gear door actuator.  I did not know I needed
one there,
---
Ah-h-h; there is no spacer on the nose gear door actuator.  The door
closing
is adjusted by adjusting the threaded rod-end bearing on the cylinder
shaft,
and then for each door by adjusting the length of the threaded end
fittings
on the rods connecting to the door hinge arm.

Al

_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw =vbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html