REFLECTOR: FG nose strut

[Carruth, Joel L]

Will do the same...Thanks Kurt!

 

Joel Carruth

Lockheed Martin 

JSF - Pilot System Software

W: (817) 763-4337

Fax: (817) 777-8378

joel.l.carruth at lmco.com

 

  _____  

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of NMFlyer1 at aol.com
Sent: Friday, June 24, 2005 9:41 AM
To: reflector at tvbf.org
Subject: Re: REFLECTOR: FG nose strut

 

Joel, 

 

I had the same issue with my 173FG. YOu have to make at least a 2" hole,
then elongate the sides so the cross tube will fit through. Mine is
about 2" for/aft, but a little over 3" side to side. I made it as small
as I could, and have to slide in one side of the cross tube (with the
gear angled to the side), then straighten it out and slide in the other
side. 

 

A small cover plate is then siliconed over the hole to close it up. 

 

Kurt Winker

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20050624/9a3a4cac/attachment-0001.htm