REFLECTOR: Transponder Location and Ground Plane
Scott Derrick
scott at tnstaafl.net
Wed Jun 22 10:22:58 CDT 2005
You must not have a retract pump in that spot?
Al Gietzen wrote:
>Just another way; I made the Jim Wier octagonal ground plane that is 13.25
>cm across the flats. The theory is that the distance across the corners is
>about 1/4 wave of the low freq end of the range, and across the flats is 1/4
>wave of the high end of the range. (Pic 1) It is SS sheet since that is what
>I had on hand.
>
>In my case that fit nicely between the batter carrier and the bulkhead, so I
>didn't have to adjust the batteries. (Pic 2)
>
>
>
>Al
>
>
>
> ------------------------------------------------------------------------
>
>
> ------------------------------------------------------------------------
>
>------------------------------------------------------------------------
>
>_______________________________________________
>To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
>Visit the gallery! www.tvbf.org/gallery
>user:pw = tvbf:jamaicangoose
>Check new archives: www.tvbf.org/pipermail
>Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
More information about the Reflector
mailing list