REFLECTOR: Leveling the plane
Scott Derrick
scott at tnstaafl.net
Thu Jun 16 08:03:45 CDT 2005
Pat,
how much are the new ones? I'm about to pull my wood ones out of the
rafters and am wondering about warpage..
Scott
Pat Shea wrote:
>The design is the same but the cross member is now
>metal. No line level attached - you place your own
>level on the metal cross member. I decided there was
>too much work riding on the accuracy of my old
>incidence gauges not to have a double check so I
>ordered a new set. FWIW, my badly warped '98 wood
>incidence gauges with the low budget line levels were
>dead on with the new ones.
>
>Pat
>
>--- Keith Hallsten <KeithHallsten at quiknet.com> wrote:
>
>
>
>>Newer-style incidence gauges? This is the first I
>>have heard of them! I
>>got my kit in '99 and got the 1/4" plywood with a
>>plastic line level
>>hot-glued to it. Of course, the line level has
>>fallen off, so I just set a
>>torpedo level on the flat side. Is there something
>>significantly better
>>available?
>>
>>Keith
>>
>>
>
>
>
>
>
>__________________________________________________
>Do You Yahoo!?
>Tired of spam? Yahoo! Mail has the best spam protection around
>http://mail.yahoo.com
>_______________________________________________
>To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
>Visit the gallery! www.tvbf.org/gallery
>user:pw = tvbf:jamaicangoose
>Check new archives: www.tvbf.org/pipermail
>Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
>
>
>
>
More information about the Reflector
mailing list