REFLECTOR: I don't know this aircraft
John Dibble
aminetech at bluefrog.com
Tue Jun 14 11:18:05 CDT 2005
I had an aluminum bracket break that held my throttle cable at the end that attached
to the carburator. Luckily I spotted it before it broke at the other end. I replaced
it in kind as I didn't know what other material to use. Would steel be better?
John
Jack Sheehan wrote:
> The rule is never put an AL fitting into an engine. They are fine on
> the rest of the plumbing but the vibration on a flex hose will often
> result in a crack.
> --
> Jack Sheehan
> Executive Director
> National Consortium for Aviation Mobility (NCAM)
> Visit the following sites
> http://www.ncam-sats.org, http://www.sats2005.com, http://sats.nasa.gov
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
More information about the Reflector
mailing list