REFLECTOR: I don't know this aircraft

[Velocity_AZ]

I did not have an aluminum fitting it was steel.

Regards,

Kevin 

-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Jack Sheehan
Sent: Monday, June 13, 2005 2:32 PM
To: Velocity Aircraft Owners and Builders list
Subject: RE: REFLECTOR: I don't know this aircraft


The rule is never put an AL fitting into an engine. They are fine on the
rest of the plumbing but the vibration on a flex hose will often result in a
crack.
--
Jack Sheehan
Executive Director
National Consortium for Aviation Mobility (NCAM) Visit the following sites
http://www.ncam-sats.org, http://www.sats2005.com, http://sats.nasa.gov
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery user:pw = tvbf:jamaicangoose Check
new archives: www.tvbf.org/pipermail Check old archives:
http://www.tvbf.org/archives/velocity/maillist.html