REFLECTOR: Xenon HID Landing Light

[John Dibble]

Is there a top side to the light?

John

Christopher Martin wrote:

>  Several of you have asked for installation pictures. This
> installation is in a RG where it is necessary to install the HID light
> into the original lamp holder in order to provide clearance from the
> retracted nose wheel. My method was to cut slots on each side of the
> original lamp opening which allows the lamp into the original holder.
> An aluminum plate is then made to mount the lamp at the bulb. The
> plate is secured to the opening by 4 rivnuts in the fiber glass. The
> lamp is then secured by the original spring system.  Christopher
> Martinchristophercmartin at earthlink.net
>
>    ----------------------------------------------------------------
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives:
> http://www.tvbf.org/archives/velocity/maillist.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20050605/7b00da09/attachment-0001.html